LONGEVITY Forcecut 40D Plasma Cutter Review

LONGEVITY does not fool around when it comes to plasma cutters. It offers a wide range of products for people with all levels of experience. You can find models for newbies, as well as models for professionals. LONGEVITY Forcecut 40D is somewhere in the middle. It is easy to use and quite intuitive, so any newbie would get along with it. It also has professional features that can entice any professional out there. Basically, it is no surprise why it has so many reviews. Now, what makes this plasma cutter so special?

LONGEVITY Forcecut 40D Plasma Cutter Review

[easyazon_link identifier=”B0087B7LCE” locale=”US” tag=”mystore200d-20″]In a rush? Click Here to get LONGEVITY Forcecut 40D at Amazon[/easyazon_link]


LONGEVITY is known for its high versatility and this product makes no exception either. If you have ever used a classic oxy-fuel torch, you will notice the difference right away. This machine has a clean and precise cut, which is normally hard to achieve when you deal with thin sheets. Also, it can go through most metals out there, from steel and aluminum to copper.

Versatility goes even farther, as the machine operates on both 110V and 220V voltage. You just have to switch the setting and it is ready to go. When used on 220V, its capabilities are different, as it has more power and can go through thicker metals.

Cost Efficiency

Cost efficiency is one of the first things you look for in a plasma cutter and this model will not disappoint you. It is not just a fair initial investment, but longterm costs are also kept under control. Operational costs will not skyrocket, so you can use it on a daily basis. Consumables are cheap and readily available in more stores. Make sure that you always have some extra tips around though. You do not want to run out of them in the middle of a project. The air compressor will maintain them for long periods of time anyway.

Fine Control Panel

The control panel comes with labeled buttons, so it is quite intuitive. It has digital display as well. One of the main controls targets the air adjustment, so you got a pretty fine tuning for a thorough customization. Another good news is that controls are gathered in one place for some extra convenience.

Features and Specifications of LONGEVITY Forcecut 40D

  • Measures 15x6x9 inches
  • Weighs 25 pounds
  • Corded electric power source
  • Comes with a handle for portability
  • No batteries needed
  • Inexpensive consumables
  • Can cut 1/2” steel at 220V and 1/4” steel at 110V
  • Can clean most metals out there
  • Requires compressed air from a compressor
  • Easy switch between 110V and 220V
  • Digital display
  • Air adjustment

Customer Reviews and Scores of LONGEVITY Forcecut 40D

With more than 40 reviews, LONGEVITY’s plasma cutter sells pretty well. Altogether, it scores 3.9 out of 5 stars. Although it does have a few complaints here and there, over 76% of all buyers have given it maximum scores.

  • I felt a bit apprehensive when I first got this welder, but it surprised me. Does a great job on 1/2” metal, but it also cuts rusty metal in a clean way. TBH, I kinda tend to abuse things, so this one has been through the same treatment. It still works perfectly.”

  • I got this cutter at a friend’s recommendation. It does its job by the book. You can use it at home, but you can also use it for a small business. You should know that it is not a commercial grade unit though, so don’t push its limits…”

[easyazon_link identifier=”B0087B7LCE” locale=”US” tag=”mystore200d-20″]==> Click Here for the LONGEVITY Forcecut 40D at Amazon <==[/easyazon_link]


In conclusion, LONGEVITY Forcecut 40D does a good job as a residential welder. It is likely to go into your heart with its power, yet small compact construction. Its durability is also a solid plus.

Review Date
Reviewed Item
LONGEVITY Forcecut 40D
Author Rating

Leave a Reply